Xtreme Mats - We've Got You Covered

The Fit

We're proud to have produced the first overlay-style golf cart floor mat in the industry!

  • E-Z-GO RXV Floor Mats - Fits All RXV Trims (2008-2022) / 2Five (2009+) / Western
  • Fits RXV (2008-2022) including RXV ELiTE, RXV Freedom, etc), 2Five (2009+), & Western
  • "ELiTE" only refers to your battery package and "Freedom" is a trim level available on both EZGO TXT and RXV models. Please confirm your model, not your trim level
  • Western carts were built on both EZGO TXT & RXV frames
  • Please confirm which model you have before ordering (see pedal diagram below)
  • Xtreme Mats fit the Gas and Electric models the same
  • This golf cart floor mat model includes a perforation that can be punched out if necessary to accommodate a horn button
Free shipping + One Year Warranty

Function Meets Fashion

These mats don’t just look great; they shield your OEM flooring from sun damage, stains, and scratches.
Protect your ride and add a stylish touch all in one go!

Our Promise To You

FAQs

Please read our FAQs page to find out more.

How to install your cabinet mat

Watch Our Tutorial- Click Here
To install your Xtreme Mats Under Sink Cabinet Mat, position the mat with the "Xtreme Mats" logo on the right side and place it in the cabinet. Adjust it to fit snugly to cover the area.

How to install your cabinet mat if your cabinet has plumbing

Watch Our Tutorial - Click Here
To measure and cut the Under Sink Cabinet Mat, start by measuring from the right and left sides of the cabinet to the center of the pipe, then measure from the front edge of the trim. Mark the pipe center on the mat from the top edge and adjust for accuracy by finding the midpoint if marks differ. Finally, drill a hole slightly larger than the pipe diameter at the marked center point with the mat’s front edge bent up at 90 degrees.

Did you order a water sensor? Here’s how to install it

Watch Our Tutorial - Click Here
Just place it in the designated location on the mat or anywhere leaks can happen and forget it. If water is present in the area underneath the sensor it will trigger a 110 dB alarm.

How to trim the edge of your mat for a tight fit

Watch Our Tutorial - Click Here
To trim an Xtreme Mats Under Sink Cabinet Mat for a tight fit, use a strong pair of scissors or a razor to carefully cut off the 1/4-inch edges. You can remove up to 1/2 inch from the width or depth to achieve the desired fit. Note that any modifications will not be covered by the warranty.

How to install your mat if you have a corner cabinet

If you have a corner sink base cabinet in your kitchen or bathroom, please see the diagrams below. Some corner cabinets make a 90 degree angle in the back and some are clipped; both options are shown. The best way to protect your corner sink base cabinet would be using one of the 2 options shown below. Xtreme Mats offers two cabinet mats depths. Our kitchen depth is 22 1/4" and vanity depth is 19 1/4" at their max expansion. Both kitchen and bathroom depth mats can be used in either orientation. You will need to take a look at all sizes of mats we offer and see what configuration would work best for you to protect against a plumbing leak from your valves, p-trap, garbage disposal or reverse osmosis filters.

What's covered in the lifetime warranty?

This warranty covers against normal wear and tear and guarantees that the product will not break, tear, or deform under normal usage. Owner must provide proof of purchase if purchased from a retailer, other than Xtreme Mats.

Didn’t find your answer?

Don't hestitate to contact us

x